0478 192 9809 A - EN
26
Pull the grass catcher box emptying
lever (1) upwards.
Push the grass catcher box emptying
lever (1) forwards. The grass catcher
box (2) swings upwards and the clippings
fall out.
The "grass catcher box open or missing"
symbol appears on the display of the
models RT 6112 C, RT 6112 ZL and
RT 6127 ZL when the grass catcher box is
raised. (Ö 10.5)
● Slowly move the grass catcher box
emptying lever towards the rear and
allow the grass catcher box to re-
engage with the rear panel.
● Press the grass catcher box emptying
lever downwards and move to the initial
position.
8.17 Grass catcher box release lever
The grass catcher box release lever is
located underneath the grass catcher box
handle.
The grass catcher box release lever must
be pulled upwards and held before
attaching or detaching the grass catcher
box.
Releasing the grass catcher box:
Pull grass catcher box release lever (1)
fully upwards and hold.
● The grass catcher box is released and
can be removed.
Locking the grass catcher box:
After attaching the grass catcher box,
release the pulled-out grass catcher box
release lever (1). Ensure that the lock
engages fully.
– Once locked, the grass catcher box is
firmly attached to the machine again.
8.18 Gearbox freewheel lever
The gearbox can be
disengaged (e.g. for pushing
the machine) or engaged (for
self-propulsion) using the gearbox
freewheel lever.
Warning:
Ensure that you do not pinch your
fingers when actuating the grass
catcher box release lever.
Warning!
Risk of crush injuries!
Only pull out the gearbox freewheel
lever on level surfaces, as the
machine may be set in motion.
If the machine is parked with the
gearbox disengaged, the parking
brake must be engaged.
To Next Page
Loading...
