ENES
37
PTEL
0478 192 9809 A - EN
Attaching the grass catcher box:
Position the grass catcher box (1) on both
snap-in hooks (2) on the rear panel.
● Actuate and hold the grass catcher box
release lever. (Ö 8.17)
Raise the grass catcher box (1) to the
stop.
● Release the grass catcher box release
lever and ensure that the grass catcher
box engages. (Ö 8.17)
13.11 Pulling loads
● Before attaching loads, check the
braking function. (Ö 13.5)
Maximum trailer weight on a level surface
= 250 kg
Maximum trailer weight on a maximum 10°
inclination = 100 kg
Maximum coupling load = 40 kg
Maximum pulled load = 40 kg
13.12 Operating on slopes
● Check the braking function before
operating the mower on slopes.
(Ö 13.5)
If the machine is operated without
the grass catcher box or deflector
(accessory), the mowing deck
cannot be engaged and
the engine stops automatically.
Risk of injury!
The driving characteristics of the
machine change when transporting
loads (e.g. longer braking
distance). The heavier the load, the
more the driving characteristics are
changed. Therefore select a lower
driving speed when pulling loads.
Avoid damage to the machine.
The maximum pulled load is
decreased on inclines.
A pulled load of 40 kg at the trailer
coupling is achieved when pulling a
trailer with a weight of 250 kg on a
level surface.
To Next Page
Loading...
