0458-828-9621-B
42
English
12 Changing the Vacuum Shredder for Use as a Blower
11.2 Vacuum Shredding
► Point the nozzle at the ground.
► Move forward slowly in a controlled manner.
11.3 Emptying the Catcher Bag
► Switch off the vacuum shredder and remove the battery.
► Detach the catcher bag from the vacuum shredder.
► Hold the catcher bag by the carrying ring in such a way
that no debris can fall out of the opening.
► Fully unzip the catcher bag and properly dispose of the
contents.
► Full close the zip.
► Attach the catcher bag to the vacuum shredder.
12.1 Removing the Suction Tube and Catcher Bag
► Switch off the vacuum shredder and remove the battery.
► Remove the suction tube.
► Remove the catcher bag.
12.2 Turning the Control Handle
► Hold the vacuum shredder firmly with one hand on the
control handle (1).
► Pull the retaining latch (3) up and hold it there.
► Turn the loop handle (2) 45 degrees counterclockwise.
► Release the retaining latch (3).
► Continue to turn the loop handle (2) counterclockwise until
it engages.
12.3 Attaching and Removing the Blower Tube
12.3.1 Mounting the Blower Tube
► Align the peg (3) with the slot (2).
► Push the nozzle (1) onto the blower tube (4) up to the
desired position.
► Turn the nozzle (1) until it engages
The nozzle (1) engages with an audible click.
► Align the retaining latch (5) with the slot (6).
► Push the blower tube (4) onto the blower.
The retaining latch (5) engages with an audible click.
12.3.2 Removing the Blower Tube
► Depress the retaining latch and hold it depressed.
► Remove the blower tube from the blower.
12.4 Holding and Guiding the Blower
► Hold and guide the blower with one hand on the control
handle - wrap you thumb around the control handle.
12 Changing the Vacuum Shredder for
Use as a Blower
3
2
1
0000097236_001
6
5
1
4
2
3
0000097245_001
To Next Page
Loading...
