Original Instruction ManualPrinted on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2017
0458-520-8621-A. VA1.H17.
0000007253_002_GB
TS 440
English
1
{
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Contents
Allow only persons who fully understand
this manual to operate your cut-off
machine.
To receive maximum performance and
satisfaction from your STIHL Cutquik
cut-off machine, it is important that you
read, understand and follow the safety
precautions and the operating and
maintenance instructions in the chapter
"Safety Precautions and Working
Techniques" before using it. For further
information you can go to
www.stihlusa.com
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
WARNING
Because a cut-off machine is a powerful
cutting tool, some special safety
precautions must be observed to reduce
the risk of personal injury. Careless or
improper use may cause serious or even
fatal injury.
Guide to Using this Manual 2
Safety Precautions and Working
Techniques 2
Sample Applications 20
Abrasive Cutting Wheels 26
Composite Cutting Wheels 27
Diamond Cutting Wheels 27
Wheel Brake System 31
Electronic Water Control 33
Mounting an Abrasive Cutting
Wheel 34
Fuel 36
Fueling 37
Starting / Stopping the Engine 38
Air Filter System 41
Engine Management 42
Adjusting the Carburetor 43
Spark Arresting Screen in Muffler 44
Spark Plug 44
Storing the Machine 46
Maintenance and Care 47
Main Parts 49
Specifications 51
Maintenance and Repairs 52
Disposal 52
Limited Warranty 53
STIHL Incorporated Federal
Emission Control Warranty
Statement for Emission-Related
Parts 53
Trademarks 55
To Next Page
Loading...
