TS 480i, TS 500i
English
26
– Store composite cutting wheels in a
frost-free place.
– Do not transport a cut-off machine
with a abrasive cutting wheel
mounted, whether composite or
diamond.
Types:
– for dry applications
– for wet applications
Economic benefit is improved and
premature wear can be avoided by
choosing and using the correct
composite cutting wheel. The short
name (e.g. "asphalt", "concrete")
– on the label and
– on the packaging (table with
recommended uses)
can help to ensure the correct choice.
STIHL composite cutting wheels are
suitable, depending on the version, for
cutting the following materials:
– Asphalt
– Concrete
– Stone
– Ductile cast pipes
– Steel; STIHL composite cutting
wheels cannot be used to cut
railway tracks.
Do not cut any other materials with your
composite cutting wheel. Always use a
composite cutting wheel rated for the
material you are cutting. Cut-off
machines are not suitable for cutting
certain metals and other substances,
including wood and plastic.
Composite Cutting Wheels
To Next Page
Loading...
