Stihl TS 500i - Air Filter System

TS 480i, TS 500i
English
39
Change the fuel pickup body every year
N Drain the fuel tank and allow it to air
out
N Pull the fuel pickup body out of the
tank with a wire hook or other
suitable tool and disconnect it from
the hose
N Connect a new fuel pickup body to
the hose
N Return the fuel pickup body to the
tank
N Press the throttle trigger lockout (1)
and throttle trigger (2)
simultaneously and hold both down
N Move the stop switch (3) to F
N Release the throttle trigger, stop
switch and throttle trigger lockout in
succession – starting throttle
position
N Press the button (4) of the
decompression valve before each
starting procedure
N Press the bulb (5) of the manual fuel
pump 7-10 times – even when the
bulb is filled with fuel
Starting
N Place the cut-off machine carefully
on the ground or other solid surface,
ensuring that the abrasive cutting
wheel does not touch the ground or
any objects. There must not be
1307BA015 KN
Starting / Stopping the
Engine
1307BA016 KN
1
2
3
3
1307BA017 KN
4
5
1307BA018 KN