Original Instruction ManualPrinted on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2014
0458-572-8621-D. VA0.C14.
0000006706_001_GB
TS 700, TS 800
English
1
{
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Contents
Allow only persons who fully understand
this manual to operate your cut-off
machine.
To receive maximum performance and
satisfaction from your STIHL Cutquik
cut-off machine, it is important that you
read, understand and follow the safety
precautions and the operating and
maintenance instructions in the chapter
"Safety Precautions and Working
Techniques" before using your cut-off
machine. For further information you can
go to www.stihlusa.com
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
WARNING
Because a cut-off machine is a high-
speed cutting tool, some special safety
precautions must be observed to reduce
the risk of personal injury. Careless or
improper use may cause serious or even
fatal injury.
Guide to Using this Manual 2
Safety Precautions and Working
Techniques 3
Sample applications 16
Cutting wheels 20
Composite resin cutting wheels 20
Diamond cutting wheels 21
Assembling the bearing and guard 24
Tensioning the ribbed V-belt 30
Fitting / replacing an abrasive
wheel 31
Fuel 32
Fueling 33
Starting / Stopping the Engine 34
Air Filter System 36
Engine Management 37
Adjusting the Carburetor 37
Spark Arresting Screen in Muffler 39
Spark Plug 39
Rewind Starter 41
Replacing the V-belt 41
Cut-off machine cart 42
Storing the Machine 42
Maintenance and Care 43
Main Parts 45
Specifications 48
Special Accessories 49
Maintenance and Repairs 49
Disposal 50
STIHL Incorporated Federal
Emission Control Warranty
Statement 50
Trademarks 52
To Next Page
Loading...
Need help?
General
