Original Instruction ManualPrinted on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2015
0458-707-8621-A. VB1.D15.
0000006714_004_GB
TSA 230
English
1
{
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Contents
Allow only persons who fully understand
this manual to operate your cut-off
machine.
To receive maximum performance and
satisfaction from your STIHL Cutquik
cut-off machine, it is important that you
read, understand and follow the safety
precautions and the operating and
maintenance instructions in the chapter
"Safety Precautions and Working
Techniques" before using your cut-off
machine. For further information you can
go to www.stihlusa.com
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
WARNING
Because a cut-off machine is a high-
speed cutting tool, some special safety
precautions must be observed to reduce
the risk of personal injury. Careless or
improper use may cause serious or even
fatal injury.
Guide to Using this Manual 2
Safety Precautions and Working
Techniques 2
General Power Tool Safety
Warnings 16
Sample applications 20
Cutting wheels 24
Composite resin cutting wheels 24
Diamond cutting wheels 25
Fitting / replacing an abrasive
wheel 28
Connecting Charger to Power
Supply 29
Charging the Battery 29
LEDs on Battery 30
LED on Charger 32
Connecting the water supply 32
Switching On 33
Switching Off 33
Storing the Machine 34
Maintenance and Care 35
Main Parts 36
Specifications 37
Troubleshooting 40
Maintenance and Repairs 42
Battery Recycling 42
Disposal 42
Trademarks 43
Addresses 44
To Next Page
Loading...
