Stihl TSA 230 User Manual (English)

Questions and Answers:

C
Catherine MartinAug 23, 2025
What to do if my Stihl TSA 230 Saw does not start when switched on?
- W
  wagnerjosephAug 23, 2025
  First, remove the battery, visually inspect the contacts, and reinsert the battery to ensure there's a good electrical connection. If that doesn't work, the battery's charge might be too low, and you'll need to charge it. The battery could also be too hot or too cold; let it cool down or warm up to between 15 °C and 20 °C. If 4 LEDs on the battery flash red, remove and reinsert the battery; if they continue to flash, the battery is faulty and needs replacement. The machine itself might be too hot, so allow it to cool off. If 3 LEDs on the battery flash red, remove and reinsert the battery; if the flashing continues, the machine needs repair. Finally, check for moisture in the machine or battery and let them dry.
C
christina44Sep 1, 2025
How to fix ragged edges on my Stihl Saw?
- D
  Diana FletcherSep 1, 2025
  If you're experiencing ragged edges or cut surfaces, crooked cuts, and heavy wear on the sides of the segments with your Stihl Saw, it may be caused by deviation in radial or axial run-out. Contact a servicing dealer or use a new abrasive wheel.
E
elliswayneAug 31, 2025
What to do if my Stihl Saw has ragged edges and no cutting performance?
- M
  michael88Aug 31, 2025
  If you notice ragged edges, crooked cuts, no cutting performance, and sparks when using your Stihl Saw, it could be due to a dull abrasive wheel or built-up edges. Sharpen abrasive wheels for stone by briefly cutting through abrasive materials. If you are using an abrasive wheel for asphalt, replace it with a new one.
H
harrisanthonyAug 30, 2025
Why does my Stihl TSA 230 Saw have poor cutting performance and high segment wear?
- G
  Gina McbrideAug 30, 2025
  If your Stihl Saw's abrasive wheel is turning in the wrong direction, resulting in poor cutting performance and high segment wear, mount the abrasive wheel so that it turns in the right direction.
T
Terry RussellAug 29, 2025
Why Stihl TSA 230 runtime is too short?
- F
  Frank ScottAug 29, 2025
  If the runtime of your Stihl Saw is too short, the battery may not be fully charged; ensure you are fully charging the battery. Alternatively, the battery's service life may be expired; check the battery and replace if necessary.
S
Shelley WatsonAug 28, 2025
Why is the running time of my Stihl Saw too short?
- K
  Kimberly SchmidtAug 29, 2025
  The running time of your Stihl Saw might be too short because the battery is not completely charged, so charge the battery. Alternatively, the service life of the battery may have been reached or exceeded.
J
Jessica MoodyAug 28, 2025
Why does my Stihl Saw switch off while I'm using it?
- W
  William WrightAug 28, 2025
  If your Stihl Saw switches off during operation, it could be due to the battery or machine electronics overheating. Remove the battery and allow both the battery and the machine to cool off. Another cause might be an electrical or electromagnetic malfunction; in this case, remove the battery and reinsert it.
M
Mary CampbellAug 26, 2025
What to do if my Stihl Saw cuts out during operation?
- A
  Aaron MartinAug 27, 2025
  If your Stihl Saw stops during use, it might be due to moisture in the tool or battery; let them dry. Overheating of the battery or tool electronics can also cause this; remove the battery and allow both to cool down. Another cause may be electric or electromagnetic interference; try removing and reinserting the battery.
K
Kara MunozAug 25, 2025
Why does my Stihl Saw switch off during operation?
- L
  Leonard JohnsonAug 25, 2025
  Your Stihl Saw might be switching off because the battery or machine electronics are too hot; remove the battery and allow both to cool off. It could also be due to an electrical malfunction; try removing and reinserting the battery to resolve this.