– When necessary, you must top up from the
filler port (1) with the specified hydraulic oil.
– After topping up, lift the forks. The oil level
is fully topped up when you no longer hear
popping noises; continue to add oil if you
still hear popping noises.
– Refit by following the above steps in re-
verse order.
Topping up the gear oil
– Park the truck as specified.
– Pull the key switch out to prevent the truck
from being accidentally started.
CAUTION
If you need to work underneath a raised truck, take
effective measures to prevent accidents such as the
truck overturning or slipping.
– Remove the cover.
– Pour correct gear oil into the grease fitting
(1).
CAUTION
Do not add gear oil that contains impurities.
– Refit by following the above steps in re-
verse order.
Maintenance
5
Essential maintenance
92 5001 801 1532 EN - 10/2021 - 03
To Next Page
Loading...
