– Remove the key switch (1) to turn off the
power, and remove the lithium-ion battery
(2).
CAUTION
When removing the cables, put them aside carefully
to avoid damaging them during the procedure.
Install the battery in reverse order, paying at-
tention to the location where the battery is in-
stalled and whether the wiring is correct.
Route the battery cable so that it is not trap-
ped when the battery is inserted.
Mounting the battery charger
NOTE
The charging stand can be secured to the wall
using expansion screws (1).
Operation
4
Battery Use and Maintenance
635001 801 1532 EN - 10/2021 - 03
To Next Page
Loading...
