Inspection and Maintenance
Maintenance - 500 hours/every 6 months
At operating hours
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
Carried
out
Note regarding servicing work
Specialist knowledge is required for servicing work. Special tools are also needed.
Contact your service dealer.
Power supply
Check that the battery cable connections are tight and grease the battery poles if
necessary.
Electrical system
Check that cables are free from damage and that the terminals are firmly attached.
Check the control unit.
Check the fastening of the cables and motor.
Drive system
Check the gearbox for abnormal sound and leakage.
Check the wheels for wear and damage.
Check the wheel bearings and their mounting.
Hydraulics
Check cylinder block and piston for damage and ensure that they are properly
sealed and secured.
Check the oil level in the oil tank.
Other
Check the frame for damage.
Maintenance - 1000 hours/every 12 months
At operating hours
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
Carried
out
Note
Perform all 500 - hour maintenance work
Maintenance
5
Inspection and Maintenance
875001 801 1532 EN - 10/2021 - 03
To Next Page
