Loading and unloading the truck
Use a lifting crane to load and unload the
truck, or use an inclined plane or a movable
platform with a slope and structural strength
compatible with the truck's performance and
weight (see "Technical Data" chapter).
DANGER
Use a crane with a suitable lifting capacity for the
weight of the truck, indicated on its designation
plate. Also take into account the weight of the
mounted battery (if applicable), consulting the rele-
vant designation plate. The lifting operations must
be performed by qualified personnel. DO NOT
stand within the crane's radius of action or near the
truck. Use NON METALLIC slings. Make sure that
the lifting capacity of the slings is suitable for the
weight of the truck.
To lift the truck:
●
Manually raise the battery cover
●
Insert the sling hooks (1) in the appropriate
points (2). The sling and hook must have an
adequate capacity for the load to be lifted.
●
Connect the other end of the slings to the
hook of a crane.
DANGER
It is prohibited to use any other method for lifting
and transporting the truck.
Do not stand in the hazard area beneath suspended
loads
1
2
OM1773
Breaking-In
This type of forklift does not require special
breaking-in operations.
Use and operation
4
Breaking-In
4145628043302 EN - 11/2021 - 07
To Next Page
