Remove the battery caps (if indicated in the
battery maintenance booklet).
CAUTION
The battery socket (A) is not suitable for the plug of
the external battery charger for batteries electrolyte
recirculation.
Do not connect the battery socket (A ) to the battery
charger to begin charging.
Disconnect the plug (C) from the socket (B).
Connect the socket (B) to the battery charger
to begin charging.
Turn on the external battery charger.
After the battery charging operation is comple-
ted, turn off the battery charger.
Unplug the socket (B) from the battery charg-
er.
Replace the battery caps (if removed previ-
ously).
Plug the battery (C) into the socket (B) again.
Lower the battery compartment cover.
NOTE
Refer to the battery charger manual for more
information.
Use and operation
4
Recharging the battery, specific for batteries with electrolyte recirculation system
5745628043302 EN - 11/2021 - 07
To Next Page
Loading...
