Still OPX 25 PLUS - On;Off Key

On/off key
The key has two positions:
I = To switch on the truck, turn the key to
position
I . Circuit powered.
0 = To switch off the truck, turn the key to
position
0 . No voltage to the circuit (Key
removal position).
NOTE
Switch off the truck after each use and every
time you move away from it. For more infor-
mation, see
⇒ Chapter "Parking and stopping
the truck", Page 143 .
WARNING
Switching on and off the truck using the key is only
permitted when the truck is stationary.
It is forbidden to turn off the truck using the key when
the truck is still moving. For emergency shutdown,
you must only use the special emergency stop but-
ton.
Use
4
On/off systems
132 45878043344 EN - 11/2021 - 12