Still OPX 25 PLUS - Page 259

1.2 Manufacturer’s type designation LTX 50
1.5 Rated capacity/rated load Q (t) 5.0
1.7 Rated draw bar pull F (N) 1000
1.9 Wheelbase y (mm) 1133
(2)(3)
2.1 Service weight (including battery) kg 1223
2.2 Axle loading, laden front/rear kg -
2.3 Axle loading, unladen front/rear kg 607/616
3.1 Tyres Rubber
3.2 Tyre size, front mm 254 x 102
3.3 Tyre size, rear mm 250 x 85
3.4 Additional wheels (dimensions) mm -
(3)
3.5 Wheels, number front/rear (x=driven wheels) 1x / 2
(3)
3.6 Tread, front
b
10
(mm)
-
(3)
3.7 Tread, rear
b
11
(mm)
604
4.7 Height of overhead guard (cabin) h
6
(mm) 2245
(3) (5)
4.8 Stand height // Seat height (min/max) h
7
(mm) 150
(3)
// 905 / 1094
4.9 Height drawbar in driving position min./max.
h
14
(mm)
1270
(3) (6)
4.12 Coupling height
h
10
(mm)
190/245/300/355/410
4.13 Loading height, unladen
h
11
(mm)
-
4.16 Length of loading surface l
3
(mm) -
4.17 Overhang l
5
(mm) 195
4.18 Width of loading surface b
9
(mm) -
4.19 Overall length l
1
(mm) 1512
(2)
4.21 Overall width b
1
(mm) 800
4.32 Ground clearance, centre of wheelbase
m
2
(mm)
70
(3)
4.35 Turning radius
W
a
(mm)
1480
(2)(3)
5.1 Travel speed laden/unladen km/h 8/14
5.1.1 Travel speed laden/unladen,backwards km/h 6 / 6
5.5 Drawbar pull, laden/unladen S2 = 60 min N 1000
5.6 Max. drawbar pull, laden/unladen S2 = 5 min N 3400
(7)
5.8 Max. gradeability laden/unladen % see diagram
5.9 Acceleration time, laden/unladen s 7.1/5.1
5.10 Service brake Electromagnetic
6.1 Drive motor, rating S2 = 60 min kW 3
Technical data
6
Datasheet (VDI) : LTX
24945878043344 EN - 11/2021 - 12