Description of labels
(1) This symbol indicates danger of crushing
and cutting hands.
(2) Designation plate showing the truck's nom-
inal values.
(3) This label indicates the permissible load on
the forks depending on the load centre of
gravity and lift height.
(4) This label indicates that you should consult
the operating and maintenance manual before
using the truck and before carrying out any
maintenance work.
(5) This label indicates where to insert the
slings for lifting the truck.
(6) This label indicates the function of the ped-
al required to lower the operator platform.
(7) This symbol, where present, indicates that
the truck is set up for use in cold storage (op-
tional).
This label, where present, indicates that you
should exercise caution while using the travel
buttons in pedestrian mode with the operator
on the ground. During use, position yourself at
the side of the truck and maintain a safe dis-
tance between yourself (particularly your feet)
and the truck.
(8) This label indicates that you must not climb
on the forks or transport people on the forks.
(9) This label indicates where to attach the
truck's lifting hook.
(10) This label is the legend for interpreting
the battery charge status, as represented by
the LED.
(11) This symbol, where present, indicates
that the truck is set up for the gel battery ver-
sion. Do not use other types of battery.
(12) This designation plate indicates that only
the on-board battery should be connected
(13) This label indicates that it is prohibited for
two or more people to be on board the truck.
Only one person must be present on the truck.
Overview
3
Markings
5345878043344 EN - 11/2021 - 12
To Next Page
Loading...
