digifobpro - Device Instructions
digifobpro User Instructions Page - 12
Settings- Continued
The digifobpro keeps a log of all downloaded events to
assist in identifying any download issues.
This option clears the log file.
File System
You can set the digifobpro to overwrite archived files so
that it is less likely to fill up, this is the default setting.
You can enable the digifobpro stored files to be seen by
Windows explorer. Hiding Archived files will ensure you
do not see files that are already downloaded. Finally
you can set the file naming convention for your
software.
You can enable 3GB of digifobpro storage for your own
use. Please be aware that this will contain your
manuals and software.
The Delete ALL option effectively reformats the Flash
Memory on your device and all files will be deleted so
use very cautiously.
Set the language. If your language is not available visit
Tachosys.com and download the latest digiconnect software as
this will contain all the latest language updates.
Set brightness, number of seconds before the unit goes to
sleep or low power mode and the number of seconds before
the unit turns off completely.
Set Date and Time.
Turn ON or OFF sounds.
To Next Page
Loading...
