digifobpro User Instructions Page - 5
To turn digifobpro ON, hold down the OK button for approximately 2 seconds.
= turn digifobpro OFF.
digifobpro will automatically switch itself off if no activity is detected for a
number of minutes. Durations for low power and off modes can be set.
Download
With digifobpro downloading is automatic. Simply insert a Driver Card in the
card slot at the top of the digifobpro with the gold chip facing you. To
download a Vehicle insert a valid Company Card in the Tachograph and then
attach the supplied cable to the Tachograph as indicated below.
Driver Card Menu
Download: insert a Driver Card in the card slot at the top of the digifobpro
with the gold chip facing you and at the bottom. digifobpro will read the full
contents of the card and commit it to it’s internal memory. Once the card is
read you can press OK to see further options.
Reviewing existing files
Choose the driver you wish to analyse and then select the Analyse Icon. You
can sort drivers by time or A-Z, Z-A by using the Left and Right arrows. A
filter screen will allow you to choose which elements of the analysis you wish
to view. You can scroll through the analysis using the UP and DOWN arrows.
To Next Page
Loading...
Need help?
General
