digifobpro User Instructions Page - 21
Change Firmware:
From time to time firmware updates will be made available for your
digifobpro.
When using digiconnect if you have Internet access you will automatically be
prompted to update as new firmware and software becomes available.
If you need to manually update the digifobpro select the ‘Change Firmware’
option and the Windows® explorer window will open. Select the firmware
upgrade file that you will have downloaded from the Internet or been
supplied by your retailer.
Once you select a file it will be automatically uploaded to the digifobpro and
a progress window will indicate the various stages of the update. The
process will take several minutes. If the firmware upgrade should fail for any
reason please refer to Troubleshooting on page 22.
Information on TREPS
Whenever you reference Vehicle Unit file data on the digifobpro we refer to
the term TREPS (transfer response parameters). A definition of each of the
TREPS is listed in the table below.
TREP 1 Overview: includes data such as vehicle ID, Last VU
download and by which type of card.
TREP 2 Activities: all tachograph recordable actions per-
formed in the use of the truck by a driver or other
card holder. Does not include faults.
TREP 3 Events and faults: all faults recorded on the tacho-
graph including; overspeeds, power interruptions
and time adjustments.
TREP 4 Detailed speed: truck speed is recorded every sec-
ond the truck is moving. There is a limit of 24
hours of data.
TREP 5 Technical data: details relating to the vehicle unit
identity, software version and calibration.
To Next Page
Loading...
