Stoneridge digifobpro User Manual

digifobpro - Device Instructions
digifobpro User Instructions Page - 4
Components
 digifobpro
 Vehicle Unit Cable
 USB Cable
Charging your digifobpro:
digifobpro can be charged by a 5 volt USB adapter commonly used with many
phones however we would strongly recommend charging your digifobpro via
a PC or Laptop USB socket.
A red LED is displayed when the unit is charging correctly. When the unit is
fully charged the charging light will change to green. Be aware that the first
charge may take several hours. For best results you should charge with the
unit powered down.
digifobpro has power saving features that can be managed via our Windows™
digiconnect software available at www.tachosys.com or as installed on the
extended storage drive available on your digifobpro.
digifobpro controls:
Return
Enter or
ON
Scroll
Menus
USB and
Charging
Vehicle
Connection
Card Reader
Digifobpro Functions

Stoneridge digifobpro Specifications

General

Brand	Stoneridge
Model	digifobpro
Category	Measuring Instruments
Language	English