digifobpro User Instructions Page - 17
1. Choose the file naming convention suitable for your analysis software
in Fig 5.
2. Choose whether you want ‘Automatic’ download of files from your
digifobpro or whether you wish to be notified of new files when the unit
is connected to your PC. By selecting Automatic each time your
digifobpro is connected to your PC any files that are not already on
your PC which exist on the unit will be downloaded automatically. A
small window at the bottom right of your screen will indicate the
progress when automatic transfer occurs.
3. Choose the location in which you wish to store your Driver Card and
Vehicle Unit files when they are downloaded from digifobpro.
4. If you tick the ‘Place downloaded files into the sub-folder of the Driver
or Vehicle’ option, whenever Driver Card files or Vehicle Unit files are
downloaded from digifobpro they will automatically be sorted into
separate directories by driver name or vehicle registration number.
5. By choosing the ‘Manual’ option you will have total control over what it
is you download from the digifobpro. In this mode you will have to
browse to the digifobpro and copy files manually using digiconnect.
Card Readers:
digiConnect will support most standard card readers and the Tachosys
digiCard. This allows you to upload Driver Cards directly into the digiConnect
default Archive Folder.
digiCentral Settings…
Tachosys devices can send data straight to your analysis provider. Ask your
Provider if they provide support for this service.
To Next Page
Loading...
