STONEX R180 - One-Pole Solution

Stonex R180 – User Manual 37
Here below the components that form the Remote configuration:
R180/Cube-a On-Board + Controller/Cube-a
5.3. One-Pole Solution
One-Pole Solution is a surveying system that combines the high accuracy of total station with the
versatility of the GNSS receiver, able to measure points not visible to the TS (Total Station). While the TS
requires reference points that are visible from an optical point of view, an RTK GNSS receiver can quickly
determinate its position with centimeter-level accuracy using data from satellites. Cube-a is already
configured to manage both the GNSS receiver and the Total Station at the same time.
Here below the components that formed the One-Pole Solution:
R180/Cube-a On-Board + Controller/Cube-a +
GNSS receiver