Need help?Do you have a question about the STONEX R2W PLUS 500 and is the answer not in the manual?
General| Brand | STONEX |
|---|---|
| Model | R2W PLUS 500 |
| Category | Measuring Instruments |
| Language | English |
Describes warning and caution symbols used in the manual.
Covers important warnings for safe instrument operation and handling.
Outlines user requirements and manufacturer liability exclusions.
Details laser classification and safety warnings for user protection.
Identifies and labels the main parts of the total station.
Explains the function of each key on the instrument's keypad.
Introduces main software functions, measurement modes, and setup options.
Lists quick access keys and procedure for touch screen calibration.
Covers battery status, replacement, and charging instructions.
Details USB connection and the optional guide light feature.
Guides on setting up the tripod and securely mounting the instrument.
Instructions for accurately levelling and centering the instrument.
How to access and navigate the instrument settings menu.
Steps to set measurement conditions and preferred units.
Configuring communication ports and reviewing instrument parameters.
Adjusting screen brightness and reticle illumination for optimal visibility.
How to initiate and begin a basic measurement session.
Detailed steps for taking horizontal and vertical angle measurements.
Instructions for performing various distance measurement modes.
Guide to setting occupied points, backsights, and calculating coordinates.
Explains Angle, Distance, Column, and Plane Offset measurements.
Accessing details about the manufacturer and software version.
Procedures for checking and setting the instrument's constant.
How to adjust the plate and circular levels for accuracy.
Instructions for checking and adjusting optical sight and plummet.
Steps to adjust the laser plummet for accurate centering.
How to check and correct horizontal collimation and vertical index errors.
Checking for alignment errors between EDM and telescope sighting axes.
Technical details of the telescope and angle measurement system.
Technical specifications for various distance measurement functions.
Details on operating conditions, power, display, and system components.
Lists all standard components and accessories provided with the instrument.
Provides the formula and chart for atmospheric correction calculation.
Explains the correction formulas for distance measurements due to environmental factors.
Instructions for mounting and dismounting the instrument from the tribrach.
Outlines the comprehensive warranty agreement and coverage.
Details procedures for instrument repair, return, and shipping.
Covers warranty for firmware/software and limitations of manufacturer liability.
Specific procedures for dealers to follow for instrument repairs and service.
To Next Page
