STONEX R2W PLUS 500 - Horizontal Angle Switch between Right and Left

R2W PLUS
23
③Collimate the second first
target B, and the horizontal
angle and vertical angle will
display on the screen of
instrument.
Collimate B
4.3.2 Horizontal angle switch between right and left
Make sure the operation is under angle measurement mode.
Operation steps
Keys
Display
①Make sure the operation is
under angle measurement
mode
②switch horizontal angle
between left and right by
Clicking “L/R Angle” key
※1
【L/R Angle】
※1 Left angle or right angle will be switched in turn every time you click the “L/R Angle”
key.