STONEX R2W PLUS 500 - Exchange of Distance Units; Distance Stake out Measurement

R2W PLUS
34
4.4.4 Exchange of distance units
Change distance unit on the screen of distance observation.
Operation steps
Keys
Display
①Click “m/ft” key.
【m/ft】
②Changed distance unit will
display in the upper right
corner. ※1
※1 Distance unit will be exchanged among meter, American feet and international feet
every time you click “m/ft” key.
4.4.5 Distance stake out measurement
This function can display the difference between measured distance and preset distance.
Displayed Value = Observed Value – Standard(Preset) Distance
Setting out among all sorts of distance measurement modes (such as slope distance,
horizontal distance and elevation difference) can be carried on.