After initiating the instrument the screen will
go to present “Welcome Interface” which is
shown right. STONEX AIOSurvey consists of
several functions, that is, “BSC Measure
(Basic Measurement)”, “STD Measure
(Standard Measurement)”, “Engineering
Surveying (FieldGenius)”, “INST Setup
(Instrument Setup)” and “About (Relevant
Information)”.
Click “BSC Measure” key to activate basic
measuring. This function is used for surveying
and calculating, including some modes, that
is, angle measurement, distance measurement,
coordinate measurement and parameter setting
during conventional surveying. Distance
measurement mode underpins Remote
Elevation Measurement and Line-height
Measurement. Coordinate measurement mode
is made up of Traverse Surveying, Angle
Offset Measurement, Distance Offset
To Next Page
Loading...
