STONEX R2W PLUS 500 - Accurate Measurement and Track Mode

R2W PLUS
33
4.4.3 Accurate Measurement and Track mode
Accurate Measurement mode: It’s a normal measurement mode.
Track mode: Track mode takes less time than accurate measurement. It is mainly applied
for setting-out survey and useful for tracking moving target.
Operation steps
Keys
Display
①Collimate the center of
prism.
Collimate
prism
②Click “Mode” key to
activate setting function
of distance measurement
mode. And this mode is set
as “Track”.
【Mode】
③Click “Enter” key,
collimate the center of
prism, and the system will
carry out measurement
based on previous setting.
【Enter】