STONEX S990A - Device Register; Set the Language

Stonex S990A GNSS Receiver – User Manual v1.0 24
2.10.2 Device register
The register code consists of 32 digits and letters. You can register the device
via WEB UI. The detailed steps are shown as followed.
In management page, you can see “registration”. Input register code and click
submit, and then registration is done. After registration, you can check the
expiration time of current registration in the page.
2.11 Set the language
As you can see, there is language button in the right-up side of WebUI. And
the S990A has 8 languages to set up. They are Italian, Chinese, English, Korean,
Portuguese, Russian, Turkish and Japanese.