Strand Lighting MX - Audio GO Playback and Setup

MX SUPPLEMENT

Issue 2
1) The
complete piece
should
now
be played back and the trigger level set
by
adjusting
the MIDI/AUDIO fader on MX . i .e . the led
should flicker on
with
the
recorded
tones .
~uswuiu~
r=11 '~
<CONFP
TttneXfada
9_ : . .
it) Set 143C to AUDIO on
CONFIG SYSTEM menu .
Q Then go
to MIDI IN . Important DO NOT PERFORM THIS STEP
BEFORE
STEP 4
or
5 AS ONCE IN MIDI MODE, MX CONTROLS
BECOME INHIBITED .
7 .) The performance can now be played back and at the appropriate time the
lighting scenes
will
change automatically .