To Next Page
L
luis20Sep 12, 2025
Why is the operating panel of my strapex STB 71 not reacting?
- MMario BrewerSep 12, 2025
The operating panel might not be reacting because the button lock is switched on. See Section 4.6 to switch off the button lock.
Why is the operating panel of my strapex STB 71 not reacting?
The operating panel might not be reacting because the button lock is switched on. See Section 4.6 to switch off the button lock.
What does the E50/51 error mean on a strapex STB 71?
The E50/51 error, displayed with an orange display and pulsating symbol, indicates that the welding or cooling process was aborted by lifting the rocker lever. Repeat the strapping process.
What does it mean when symbols are flashing on my Strapex Power Tool?
Flashing symbols indicate that the battery temperature is too low. The tool should recover by itself at a higher battery temperature, and work is still possible, although the maximum strap tension may not be reached.
Explains the meaning of various warning symbols and usage conventions used in the manual.
Provides guidance on the proper disposal and recycling of the tool and its components.
Defines the proper application of the tool and lists prohibited uses to prevent hazards.
Outlines essential safety measures and personal protective equipment for operating the tool.
Covers general safety warnings related to work area, electrical safety, and personal conduct.
Details the physical parts and design features of the strapping tool.
Describes the operational principles and mechanisms of the strapping tool.
Lists items included in the package and available optional accessories.
Instructions for charging, inserting, removing, and checking the battery status.
Guides on choosing between Semi-automatic, Fully automatic, and Manual operating modes.
Explains how to set the desired strap tension and welding time for optimal performance.
Details how to lock the touch pad and configure favorite settings for quick adjustments.
Describes the tool's energy-saving sleep mode and how to exit it.
Step-by-step guide on how to strap packages using the tool.
Procedures for visually inspecting the quality of the strap seal after strapping.
Instructions on how to change the tool's strap width compatibility.
Outlines the preventive maintenance schedule and procedures for cleaning the tool.
Instructions for re-greasing the tool and replacing wear parts like tension wheels and tooth plates.
Guides on replacing the cutting knife and performing a tool reset procedure.
Provides solutions for common error displays, symbols, and operational issues.
General| Brand | strapex |
|---|---|
| Model | STB 71 |
| Category | Power Tool |
| Language | English |
