strex SP50 - Maintenance and Service; Storage and Transport Guidelines

71
MAINTENANCE & SERVICE
● Apart from occasional cleaning, the OBD2 Scanner is maintenance-free.
● You may not reconstruct, self-repair, or disassemble the OBD2 Scanner.
● Check regularly for damage and severe wear.
WARNINGS:
● Do not attempt to open the OBD2 Scanner or remote control for
maintenance. Removing the housing or improper reassembly may
cause electric shocks, damage, short circuit, or re.
● If for any reason you open the housing, the warranty will become null
and void. The device contains no user-serviceable or replaceable parts.
● Maintenance, service, and repairs may only be carried out by
the manufacturer, a professional workshop appointed by the
manufacturer, or a similarly qualied person. To obtain maintenance
or service, contact us rst at our e-mail address info@strex.nl.
● For missing accessories such as the manual or other items, contact us at the above-mentioned
e- mail address.
● In case of a defect, return the product to STREX with a failure description, proof of purchase, and
all accessories.
STORAGE & TRANSPORT
● We advise cleaning the OBD2 Scanner before long-time storage.
● Store the device in a place not exposed to sunlight & humidity, and which is dust-free.
● Do not store the device in extremely high or extremely low temperatures. This can damage the
device.
● Store the device beyond the reach of small children.
● Protect the OBD2 Scanner against vibrations and shocks during transport.
● After transport or storage at very cold temperatures, the OBD2 Scanner must be accustomed to
room temperature for approx. 30 minutes due to possible condensation. After that, the device
can be used.