55
1) Use the UP/DOWN scroll button to select Read Codes from the Diagnostic Menu and press
ENTER.
2) Use the UP/DOWN scroll button to select Stored Codes or Pending Codes from the Trouble
Codes menu and press ENTER.
● Stored codes are also known as "hard codes" or "permanent codes". These codes cause
the control module to illuminate the malfunction indicator lamp (MIL) when an emission-
related fault occurs.
● Pending Codes are also referred to as "maturing codes" or "continuous monitor codes".
They indicate problems that the control module has detected during the current or
last driving cycle but are not considered serious, yet. Pending Codes will not turn on
the malfunction indicator serious, yet. Pending Codes will not turn on the malfunction
indicator up cycles, the code clears from memory.
Read Codes
To Next Page
Loading...