6.5 Subtitles
Some channels support a choice of subtitle languages. Press SUB in viewing mode to display a list of available subtitle
languages. Select your subtitle of choice with p/q and press OK to confirm. Press to leave without making
changes.*
*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they might be activated via Teletext if available.
6.6 Timeshift*
Timeshift allows you to pause live broadcasts and resume playback later. To activate this function set the Timeshift
mode in the DVR Set menu in HDD Information to Timeshift. For details, see 7.5.3. Press 2 in viewing mode to activate
Timeshift. The progress information banner appears on screen. Live TV keeps playing for moment and will then pause.
Press u to resume time-shifted playback. Press 3 to return to live TV.
NOTE Recording, Timeshift and its playback only work properly when a fast USB storage device
such as a USB 2.0 HDD is connected to the receiver. Recording, Timeshift and playback of HD
content require sufficient read/write speed of the used USB storage device.
*This user manual describes the full functionality including the recording function and may not be applicable if the software for recording via
USB has not yet been installed.
6.7 EPG (Electronic Programme Guide)
The Electronic Programme Guide is a very useful function that allows you to view event schedules and programme
information and to mark events/movies for recording. To access the EPG, press the EPG button in viewing mode. Use
p/q to select a channel and tu to select an event. Press OK to display detailed information of the selected event.
Use to quit the detailed information screen. Press RED to access further step functions. Use tu to select a step and
OK to execute it. Press to quit the step function. Press GREEN to set a timer for a selected event. Refer to section
7.3.4 for details of the timer function.
NOTE Availability of EPG data depends on the broadcast.
6.8 Instant Recording*
Your new receiver allows you to make an instant recording of the programme you are watching. Simply press 4 to start
the recording. To enter the duration for the recording, press 4 again. Use the 0~9 buttons to enter the recording time
and press OK to confirm.
At the beginning of recording an icon will be shown at the upper right corner of your TV screen. To stop the recording,
press 3 then select Yes and press OK again. During recording it is possible to change to another channel as long as it is
broadcasted on same frequency.
*This user manual describes the full functionality including the recording function and may not be applicable if the software for recording via
USB has not yet been installed.
**Please connect a USB storage device with sufficient free space before you start a recording.
NOTE: Recording, Timeshift and its playback only work properly when a fast USB storage device
such as a USB 2.0 HDD is connected. Recording, Timeshift and playback of HD content
require sufficient read/write speed of the used USB storage device.
7.0 MAIN MENU
The main menu gives you access to settings, multimedia functions and games. To access the main menu, press MENU
in viewing mode. The main menu consists of the following sub menus: Edit Channel, Installation, System Setup, Tools and
Media Player.
10
To Next Page
Loading...
