Free/Scramble: First in the list will be Free-To-Air channels.
Lock: All unlocked channels will placed first in the list.
Rename
Press GREEN in Edit Channel to enable the Rename function. The Rename sign will move up to indicate that Rename
is selected. Use p/q to highlight a channel and press OK to select it. A text field will now pop up at the right of the
screen. Use tu p/q to select characters and enter them with OK. When you have finished editing, press YELLOW to
enter the changes. When all changes have been made, press twice. Select Yes to save the changes or No to discard.
Delete
Press BLUE in Edit Channel to enable the Delete function. The Delete sign will move up to indicate that Delete is selected.
Use p/q to highlight a channel and press OK to mark it for deletion. When you have marked all channels you wish
to delete, press twice. A confirmation banner will be displayed. Select Yes to delete the marked channels or No to
cancel.
7.1.2 Radio Channel List
Basically, the operation of the Radio Channel List is the same as in the TV Channel List. The only difference is that in Radio
Channel List there is no video information, so it will always display the background on the preview screen.
7.1.3 Delete all
Use this menu to delete all stored channels. Select Delete All with p/q and press OK. The receiver asks you to enter the
pin code. (DEFAULT PIN: 1234). Inside the confirmation window select Yes with tu and press OK to delete or select
No to cancel.
Warning! The Delete all function will permanently delete all current channels and all favourite lists from
your receiver, and you are not able to leave the menu until you search for channels again.
7.1.4 Rename Favourite list
This menu allows you to personalize the names of the 8 available favourite lists.
Use p/q to select Rename Favourite List from the Edit Channel Menu and press OK to proceed. The names of all groups
are now displayed. Select a favourite group with p/q and press OK to edit its name. A text field will now pop up at the
right of the screen. Use tu p/q to select characters and enter them with OK. When you have finished editing, press
BLUE to save the changes. When all changes have been made, press twice to leave this menu.
7.2 Installation
7.2.1 Channel Scan
Use p/q to select Installation, press OK or u to advance.
Use p/q to select Channel Scan and press OK to enter.
Use tu to toggle between available scan modes: By Channel and By Frequency.
If By Channel is selected, use p/qtu to select Channel No Symbol Rate and Scan QAM. If Network Search is set to On, all
channel belonging to the network of your operator will be found, according to NIT information provided in the signal
of the operator.
If By Frequency is selected, use p/qtu and 0 ~ 9 to select Frequency, Symbol Rate and select the correct Scan QAM
parameter. Highlight Search and press OK to start scanning. Newly found channels will be added to the channel list.
If Network Search is set to On, all channel belonging to the network of your operator will be found, according to NIT
information provided in the signal of the operator.
NOTE: Network ID (NID) and other technical data can be found on the website of your “Provider”
(Broadcaster, cable network/your local cable system) usually. Start a Network search from
there to find all channels belonging to the network.
12
To Next Page
Loading...
