EasyManua.ls Logo

Strong SRT 3002 - Technical Specifications

Strong SRT 3002
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Playback of video (or Timeshift)
is causing picture freeze/macro
blocks or similar distortion,
especially on HD content.
Read/write speed of your USB device
could be too low.
Make sure to use a USB storage
device with sufficient speed and
space. Pen drives (‘USB sticks’) may
not support sufficient speed.
9.0 TECHNICAL SPECIFICATIONS
Tuner
Tuner: NXP8250B
Input Impedance: 75 Ohm
Minimum Input Level: ≤ 40 dBuv (64 QAM)
≤ 44 dBuv (256 QAM)
Receiving Channel Range: 47 MHz ~ 862 MHz
Modulation: 16, 32, 64, 128, 256 QAM
Symbol rate: 3.6 M ~ 6.952 MS/s
Video Decoder
Video resolution: 480i, 480p, 576i, 576p, 720p, 1080p
Decoding & Video Out: PAL
Aspect ratio: 4:3, 16:9
Audio Decoder
Audio decoder: MPEG-1 LAYER 1&2, Dolby Digital, Dolby Digital Plus
Audio support: AC3+/PCM/Dolby® Digital Plus*
*Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories.
Multimedia
Video playback: MPEG encoded (mpg), VOB, TS, M2T, M2TS, MPEG-4 and MOV*
Audio playback: MP3 and OGG*
Picture view: BMP and JPEG*
*STRONG cannot guarantee the playback of all files although extensions are listed, as it depends on codec used, data bit rate and resolution (all
MPEG codec formats are supported).
System
Transponder: DVB-C
Main Processor: Ali M3711B
Demodulator: NXP8250B
Memory: DDR2 64 MB
FLASH size: 4 MB
Connectors
Cable IN - IEC Female
Cable OUT - IEC Male (Loop through)
HDMI
TV SCART
S/PDIF (coaxial)
USB 2.0 port : DC 5 V, 500 mA (max.) supported
Net adapter (12 V/0.5 A)
General Data
Supply voltage: 100 - 240 V AC (SMPS), 50/60 Hz
Power consumption: 4 W (typ.) 6 W (max.)
20

Related product manuals