Service Type Select DTV to search Digital TV channels only, RADIO to search radio channels
only or All for a complete search.
It is recommended to use the default settings.
NOTE: For users in Germany, who use the ASTRA 19.2E satellite to watch their
favourite Free-To-Air programmes, only press the GREEN button to load the
pre-installed channel list and start watching directly.
3.2 DVB-T/T2 installation
Terrestrial Setting
Here you only need to press OK to start searching.
All settings are automatically set by country selection you made in rst step.
NOTE: If you have an active antenna, please check the user manual of the antenna
for external power supply. The TV can NOT supply power used for an active
antenna.
3.3 DVB-C installation
Cable Setting
Press to highlight your settings.
Scan type You can select Network Scan or Full. (Default Network Scan for quick search
advised).
NOTE: Full scan will have a duration of approximately 20 minutes, depending on
your cable network.
Network ID Please enter (with 0 ~ 9) the used Network ID from your provider.
Frequency Please enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Symbol Please enter (with 0 ~ 9) the used Symbol from your provider. (Ks/s)
NOTE: Please check the settings for your cable system used by your provider!
Press OK to continue and to start search process.
Crypted Select FTA Channels to search Free-To-Air channels only or All Channels to
search FTA and encrypted channels
Press to highlight the country that you want to install, then press OK to start searching.
If all went well with auto channel installation, your TV will start to play on rst channel.
We hope you will enjoy it for many years.
8
To Next Page
Loading...
