Strong SRT 32HA3003 - 6.2.3 Browse photos; 6.2.4 Software update via USB

NOTE:
 If one (or more)  le(s) of the play list is selected, the buttons 7 8 will
play only selected  les.
 This menu only shows supported  les.
 Files with other  le extensions are not displayed, even if they are saved on
the same USB storage device.
 An over-modulated mp3  le may cause some sound distortion during
playback.
 This TV supports lyrics display (in English). The maximum number of
characters per line is 48.
 The  le name of music and lyrics must be the same in order to display
lyrics while the music is playing.
 If you want to show the associated lyrics on the screen with the music, you
must store these in the same folder using the same  le name with “.Irc”  le
extensions.
6.2.3 Browse photos
Fig.8
Press during viewing INFO or OK to display/exit from the menu bar (Fig.8).
Play & Pause/Stop/Previous/Next
Press 2 to play or pause the playback. Press 3 to stop playing. Press 7 8
to show the previous or the next picture. Press  to highlight the icon on
the control bar, and then press OK. The TV will response accordingly.
Rotate Highlight the icon in the menu bar and press OK to rotate the picture 90
degrees clockwise or counter clockwise.
Info Highlight the button and press OK to check the information of the shown
photo.
Zoom In/Zoom Out Highlight the icon on the menu bar and press OK to zoom in or zoom out of
the image.
Move View When the image is magni ed, use this function for convenient check.
Highlight this icon, press OK, then press  to move the image.
NOTE: The move function
is only available when the image is enlarged.
6.2.4 Software update via USB
From time to time you can check if there is an improved software version available. This can be viewed
and downloaded from our website www.strong.tv. Search the model number on our website's service
support section. If there is an improved software version you can download the  le and copy it to the
root of a USB device. Then press  button to select Software Update (USB) from the SETUP menu
on your TV. Afterwards plug your USB device into the USB slot and press OK to update the respective
software. Con rm with Yes using . When the update is completed, remove the USB stick, disconnect
your device from the main power supply and plug in again.
15
English