Strong SRT 5434 - Channel and System Configuration; Picture and Channel Search Settings; System Settings and Information

(c) TV Format
If the picture does not appear to be correct you can change this
setting. This should match the most common setting for TVs in your
country.
(d) 3D Output
Change 3D Output Setting.
[OFF] Set 3D Output O
[Side by Side]Set 3D Output format SBS
[Auto] Set 3D Output Auto
[Top/Bottom]Set 3D Output format T/B
(f) OSD Transparency
Change OSD Transparency. [0%], [20%], [40%], [60%], [80%].
(3). Channel Search
(a) Auto Search
This option will automatically search for channels and save them
once the scanning is complete.
All previously saved channels and settings will be deleted.
(b) Manual Search
This option allows you to scan for new channels without deleting
previously saved channels and settings.
(4). System Setting
(a) Set Password
Enter your old password or the default password ‘000000’. Enter
your new password, Press OK button and press Exit.
The master unlock password is ‘888888 ‘ .
(b) Restore Factory Default
In Main Menu select [Restore Factory Default] . Enter your password
or the default password ‘000000’ and press OK to
conrm. This option will delete all preset channels and settings. The
master unlock password is ‘888888 ‘.
(c) System Information: Software Version
(d) Software Upgrade via USB
11