Safety Instructions
Safety Precaution
This STB has been designed and manufactured to satisfy the
International safety standards. Please read the following safety
precautions carefully before operating this receiver.
Main Supply:
Before operating, please check the units operating voltage is
100-240V AC 50/60HZ
Overload:
Do not overload a wall outlet, extension cord or adapter, neither
use damaged power cord or touch it with wet hand as this may
result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water,
and that no objects lled with liquids, such as vase, shall be
placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sucient
airow to the unit. Do not put the receiver on soft furnishings or
carpets. Do not expose the receiver to direct light or do not place
it near a heater or in humid conditions. Do not stack other
electronic equipments on top of the receiver.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean
the receiver by a soft cloth or mild solution of washing-up liquid
(no solvents).
3
To Next Page
Loading...
