Strong SRT 5434 - Installation and Setup; Connection and Location Advice; Unit Casing Safety Warning; Device Features and Software Updates

Connection:
Disconnect the receiver from the mains when you connect it to
Antenna or disconnect it from Antenna. Failure to do so, could
possibly cause damage to the Antenna.
Location:
Put the receiver indoor in order to avoid lightening, raining or
sunlight.
Uncover:
Do not remove the cover, to reduce the risk of electric shock.
Contact qualied and licensed service personnel to repair the
receiver, or contact your dealer.
Reference
Auto Search
Manual Search
PAL/NTSC Conversion
True full Color (32 bits) on screen display (OSD)
Menu language supported: English
Multi-language audio supported
Multi-language DVB Subtitle output
7 days Electronic Program Guide (EPG)
Teletext output through VBI and OSD.
USB 2.0 Interface
Software update:
If new software becomes available for this model, it can be
downloaded from our website (www.strong.com.au) and then
placed onto a USB. Plug in the USB into the USB port on the unit
and then go to:
Menu > System > Software Update >USB Upgrade
4