Strong SRT 6200 - Factory Default Reset

PART 1 • English
10
a) Download the required update file for your receiver model from our website www.
strong.tv > Support
b) Unzip the file, copy it to your USB device and connect it to the USB port of receiver.
c) Select “Update by USB” then the update file and press OK.
NEVER power off your receiver during update process and flashing data. Do not
unplug the USB device during update. This may cause damage to the receiver and will
void warrenty.
d) Once the update is completed, the receiver returns to normal viewing mode and is
ready to use.
nBackup to USB
This option can be used to store your settings, channels or the complete software.
It can be helpful to re-load your channels after a factory reset or to load the channel order
to more receivers.
a) Connect an USB device to the USB port of receiver.
b) Select “Backup to USB” and press OK.
c) Choose between “Loader + App” or “User Database” and press OK to start the back-up
process. “Loader +App” will backup system software, while “User Database” will back up
the channel database and settings.
NEVER power off your receiver during the backup process. Do not unplug the USB device
during the backup. This may cause damage to the receiver and will void warrenty.
d) Once the backup is completed, the receiver returns to “System Update” menu.
e) File “Idapp1.ssu” will be created on the USB device if “Loader + App” has been selected
resp. file “userdb.ssu” if “User Database” has been selected.
nTo restore user data
a) Connect the USB device with backup of database to the USB port of receiver.
b) Go to System Setting – System Update and select “Update by USB”.
c) Select a file with database backup (The default name of the file is “userdb.ssu”) and press
OK.
d) Confirm update.
NEVER power off your receiver during update process. Do not unplug the USB device
during update. This may cause damage to the receiver and will void warranty.
e) When update of database is completed, the receiver will start with channel #1 on screen.
WARNING: INCORRECT OPERATION MAY CAUSE UNREPAIRABLE DAMAGE TO THE RECEIVER.
1. DO NOT POWER OFF THE RECEIVER DURING THE DOWNLOADING
PROCESS.
2. DO NOT PLUG IN OR REMOVE THE USB DEVICE WHEN THE RECEIVER IS
POWERED ON.
5.4 Timer
You may set a timer to let the receiver perform designated actions. Use pq to select timer. Press
OK to enter the selected timer settings. Press RED to activate or inactivate the selected timer.