PART 1 • English
6
LNB Type, LNB Low Freq, LNB High Freq, Band control, Polarisation control, DiSEqC Switch and
Antenna mode.
4.3 Antenna mode
a) Fixed dish
Set Antenna mode to Fixed, select NEXT and press OK. The Adjust antenna screen appears.
Select a transponder receivable at your location and adjust the antenna position for maximum
signal strength and quality levels. When adjustment is completed, choose NEXT and press OK.
The Channel Setup menu will appear.
b) Dish mounted on DiSEqC 1.2 motor
Set Antenna mode to DiSEqC 1.2, choose NEXT and press OK. The menu Adjust antenna will appear.
Select a transponder receivable at your location (choose Transponder field and select transponder
with tu). Then choose the Move Dish field and adjust the position of the dish with the tu buttons.
Once the dish is adjusted to the desired position, select Store position and set the number of the
position with the tu keys. Then choose NEXT and press OK. The Channel Setup menu will appear.
c) Dish mounted on GOTO X motor
Set Antenna mode to GOTO X, choose NEXT and press OK. The menu Adjust antenna will
appear. Select a transponder receivable at your location (choose Transponder field and select
transponder with tu). Then select the field My Longitude and enter the value of your longitude
with the numeric keys. Use tu to select hemisphere East or West. Then select My Latitude
and use the numeric buttons to enter the value of your latitude. Use tu to select hemisphere
Nord or South. Select Goto Position and press OK. Your dish will be turned to the position of the
satellite. Select NEXT and press OK. The Channel Setup menu will appear.
Select NEXT and press OK to start the scan. When the scan is completed, the receiver will save the
services information automatically and exits to normal viewing mode.
5.0 MAIN MENU
All the important settings and features of your receiver can be operated in Main Menu. It consists of
the sub-menus: “Channel Organizer”, “Installation”, “System setting”, “Timer” and “Multimedia”. To
open the MAIN MENU press MENU.
5.1 Channel Organiser
In MAIN MENU press pq to move to Channel Organiser and press OK to enter the Channel
Organiser menu. It consists of sub-menus “Channel Manager” and “Favourites Manager”.
5.1.1 Channel Manager
You can change the order of the channels, move, delete and edit channels. To change the satellite,
use the RED button.
Sort (GREEN button) You can sort channels by “Name a~z”, “Name z~a”, “Free-CA”, “Fav–NO
Fav” or “Frequency Low-High”.
Edit (YELLOW button) Select the channel you want to edit and press YELLOW (Edit) to move into
the modify program menu to modify Program Name, Frequency, Symbol
To Next Page
Loading...
