PART 1 • English
12
6.4 Selection Audio Language
Press AUDIO to select the audio language. Select Audio Channel or Sound mode with pq and
Audio channel number or Sound mode (Stereo, Left or Right channel). Press OK to confirm your
selection. Your selection will be memorized for current channel. Receiver will play always the last
selected audio track when you select this channel in future.
Note: Audio track with “(AC3)” can only be listened if receiver is connected to digital
audio amplifier and amplifier is ON.
6.5 Teletext function
Press TEXT in view mode and pq to add/subtract displayed page number. Press numeric buttons
to input a page directly.
6.6 Subtitles function
Press SUB in view mode. If channel has subtitle information, Subtitle Language selection menu will
appear. Use tu to select between DVB and Teletext subtitles. Use pq to select subtitle language
and press OK to confirm.
A.1 TROUBLESHOOTING
There may be various reasons for the abnormal operation of the receiver. Check the receiver
according to the procedures shown below. If the receiver does not work properly after checking it,
please contact the dealer. Don’t open the receiver cover. This may cause a dangerous situation and
the warranty will get void.
Cause Remedy
The display on front
panel does not light
up.
The power cord is not plugged in.
Receiver is in stand-by mode.
Your model is without display.
Check, that the power cord is
plugged into the wall outlet.
Switch ON receiver.
Your model is without display.
No picture or sound Wrong connection of the Audio/
Video output of the receiver to TV.
Connect the Audio/video output of
the receiver to TV correctly.
Audio muting.
Audio selection is on AC 3
Press the Mute button.
Press AUDIO button and select
other audio channel
TV power off, wrong channel or
input.
Turn on TV, select correct channel
or input.
To Next Page
Loading...
