Strong SRT 6201 - 2.2 Remote Control Unit; 3.0 Connections; 3.1 Basic connection with SCART cable; 3.2 Connecting to Satellite Dish

PART 1 • English
4
2.2 Remote Control Unit
Fig. 3
Turns the receiver On/Stand-by.
Mutes audio output of the receiver.
0~9 Changes channel and controls numeric functions
AV Toggles between TV and receiver (AV) mode
TV/R Toggles between TV or radio mode
MENU Shows the main menu and exits from any level of menu to view mode
EXIT Exits from the menu or sub-menu and cancels the progressing function if applicable.
pq Changes the current program to the previous/next program in TV mode.
Moves the cursor upward/downward in menu mode.
tu Increases/decreases the volume level in TV mode.
Changes the setting values in specific menu item in menu mode.
OK Activates the highlighted menu item. Displays a channel list according to TV/radio
mode in TV mode.
FAV Toggles favourite mode ON / OFF.
EPG Shows the EPG (Electronic Program Guide) when menu is off.
V+ / V- Increases/decreases the receiver volume level
INFO Shows information banner
AUDIO Selects available audio language(s) for the watched channel.
Selects stereo ((•)), left-mono ((• or right-mono •)).
ZOOM Zooms in selected part of TV video
P+ / P- Page up and down in menu list
SAT/RED Selects satellite lists in channel list mode
TEXT/GREEN Shows current service’s teletext on OSD
SUB/YELLOW Shows list of subtitled languages available within current channel
RCL/BLUE Recalls the last viewed channel
2.3 Default PIN code: 0000
3.0 CONNECTIONS
3.1 Basic connection with SCART cable
Fig. 4
3.2 Connecting to Satellite Dish
Connecting a fixed satellite dish to your receiver (Fig. 5)
Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch (Fig. 6)
3.3 Connecting USB device
Fig. 7