13
PART 1 • English
English
to a digital surround amplifier. The digital output can be switched off by setting
Digital Audio to Off.
Video Format: This setting is only active when the receiver is connected to the TV set via
HDMI. It allows you to set the preferred HDMI screen resolution. Available
options depend from your TV set.
Once all settings are made, press EXIT to leave the Output Options menu. A confirmation banner will be
shown. Press OK to save your settings or EXIT to discard.
7.2.3 Time Setting
This menu allows you to set the way the receiver collects and adjusts the time. You can also adjust the Auto
Power Down function here. Use pq to highlight the setting you wish to change and tu or [0~9] to change
the value of the highlighted setting. Press OK for a list with all available options for the chosen setting.
Time Display: Defines when the front panel display will show the clock. Possible settings are:
Off and Stand-by only.
Use GMT: On: the receiver will use broadcast time. Use the Time Zone setting to define
the deviation from GMT time. Summer Time can be set to On or Off.
Use GMT: Off: Allows you to enter the time settings manually. Use the [0~9] buttons to set
the current time in the Local Time option. Use pq to move the highlight to
Local Date and press OK. A calendar will be displayed. Use pqtu to select
the actual date and press GREEN to confirm.
Auto power down
Auto Power Down is a new, power saving feature that helps you with reducing power consumption. It will
switch off the receiver when no command is given for at least the set time. Possible settings are: 1~6
hours with one hour steps and Disabled.
Once all settings are made, press EXIT to leave the Time Setting menu. A confirmation banner will be
shown. Press OK to save your settings or EXIT to discard.
7.2.4 Parental Control
In this menu you can enable or disable the menu lock function and change the PIN code. Use pq to
highlight the setting you wish to change and tu or [0~9] to change the value of the highlighted setting.
Menu Lock: If Menu Lock is set to Enabled, items in the Main Menu are only accessible after
entering the PIN. (Default PIN: 0000) When set to Disabled, all menu items are
freely accessible.
Change PIN Code: Use this function to set your own personal PIN code. Highlight Change PIN
Code with pq and press OK to advance. A banner with three fields pops up:
Enter your old PIN at PIN Code. (Default PIN: 0000) Enter your new PIN at
Enter New and again at Reconfirm. A successful change of PIN is confirmed by
an on screen message. Use EXIT to go back to the previous menu.
Once all settings are made, press EXIT to leave the Parental Control menu. A confirmation banner will be
shown. Press OK to save your settings or EXIT to discard.
7.2.5 OSD Display
This menu allows you to set the OSD (On Screen Display) functionality of your receiver according to your
To Next Page
Loading...
