19
PART 1 • English
English
Symptom Cause Remedy
The USB storage device
is not working properly.
Wrong formatted. Format USB device by receiver in
menu Channel>File Explorer.
The external USB
HDD does not start.
Power consumption is too high. Connect an extra power supply
adapter to your USB HDD device.
The receiver switches
to STBY automatically.
Auto Power Down function is
activated and reached the adjusted
time (default 3h).
In the menu Setup>Time Setting you
can adjust the Auto Power Down time
or disable it.
9.0 SPECIFICATIONS
Demodulator
Demodulation: QPSK, 8 PSK
Input Symbol Rate: DVB-S QPSK:1~45 Ms/s
DVB-S2 8PSK/QPSK: 10~30 Ms/s
FEC Decoder: Auto,1/2, 2/3, 3/4, 5/6, 7/8 in DVB-S mode;
1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 in DVB-S2 mode
2/3, 3/5, 3/4, 5/6, 8/9, 9/10 in DVB-S2 8PSK mode.
Video Decoder
Profile Level: MPEG-2 MP@ML, MP@HL, MPEG-4 H.264/AVC
Input Rate: Max. 90 Mbit/s
Aspect Ratio: 4:3, 16:9, Pan & Scan, Letterbox, Combined
Frame Rate: 25 Hz for PAL, 30 Hz for NTSC
Video Resolution: 576p, 720p, 1080i
Audio Decoder
Audio Decoding: MPEG-1 Layer 1&2, MPEG 4 H.264 AAC, AC3 Downmix
Audio Mode: Mono L/R, Stereo, AC 3
Frequency Response: 20 Hz~20 kHz, <+/-2 dB
60 Hz ~ 18 kHz <+/- 0.5 dB
Sampling Rate: 32, 44.1, 48 kHz
Tuner
Connector: 1xF Type , IEC169-24, Female
Input Frequency Rage: 950-2150 MHz
RF Impedance: 75 Ohm unbalanced
Signal Level: -75 to -25 dBm
LNB Power: 13 / 18 V DC (+/-5%)
Max. 0.5 A max, overload protected
DiSEqC Versions: 1.0, 1.1, 1.2, GOTO X, Tone Burst.
To Next Page
Loading...
