18
CLEANING SCHEDULE (“D” = Daily / “W” = Weekly)
Area/
Component
D W Task
Clean
Acrylic
X
Acrylic MUST BE cleaned according to these instructions to prevent acrylic
surfaces from becoming cloudy, dull or scratched.
DO NOT use a dry cloth or paper towel to wipe off dust or debris (this can rub
dirt and dust into the acrylic surface).
BEFORE cleaning, use air pressure or feather duster to blow or remove all
dust and debris.
DO NOT use household cleaners (such as ammonia, bleach, Windex® or
Formula 409®).
DO NOT use powder scouring cleansers (such as Comet® or Ajax®) or other
abrasive cleansers on acrylic!
DO use a soft sponge or cloth with a mix of warm (not hot!) water and mild
soap solution (such as Palmolive®, Joy®, Dawn®, or Ajax® dishwashing
detergents) to wipe down surfaces.
DO use acrylic cleaning product such as Brillianize®, or Novus® #1 (if you
want to purchase cleaners specifically formulated to clean acrylic).
DO rinse out the soft sponge or cloth often in the solution while cleaning the
acrylic. This keeps the dust and debris from being collected in one area and
relocated to another!
DO wipe dry with a microfiber cloth, microfiber terry cloth or chamois cloth to
dry acrylic surfaces.
DO NOT wipe dry with a dry cloth or paper towel!
DO use products such as Novus® #2 to remove fine scratches, haziness and
abrasions that can form in acrylic. Also, Pittman ALR® may be used to
removed oxidation (cloudy or dull acrylic surfaces).
Note: Model MI6R.6620 adjustable acrylic dividers may be removed,
submersed in warm, soapy water, rinsed, dried and returned to case.
Clean Case
Interior
X
Decks and rack wires can be wiped down with warm soap and water
solution and sponge or clean cloth.
X Remove the decks and rack wires and clean with soap and water.
X Vacuum tub under deck. Clean with soap and water. Wipe dry with clean cloth.
X
Keep drains clean and free of debris which could clog the drain and rob the case
of needed refrigeration.
To Next Page
Loading...
