Structural Concepts SB5735 Series - Fluorescent Light Operation; Fluorescent Light Guidelines

7
START-UP AND OPERATION, CONTINUED
3. Fluorescent Light Guidelines
 Turn lights on. All of the lights should come on at the
same time. First time lighting may require a short warm
up period for the bulbs. Slightly dim or a flickering of
new bulbs is normal. If lights do not turn on, check that
all of the light plugs are in.
Removal of lamps:
 Grasp lamp firmly and carefully pull downward and out
from socket.
 See photos at mid-right.
Installation of lamp:
 Align pins with slot.
 Insert pins into socket and push upward into place.
 See photos below.
OFF
ON
Rocker Switch
Light Switch
Standard
Fluorescent
Light Fixtures