When you perform manual preparation, you hold the specimen in your hand and press it firmly onto
and across the preparation surface.
CAUTION
For manual preparation use the switch on the side of the
specimen mover head to disable rotation of LaboForce-
50.
CAUTION
Wear suitable gloves to protect fingers from abrasives
and warm/sharp specimens.
CAUTION
When you perform manual grinding or polishing, be
careful not to touch the disc.
CAUTION
Do not try to collect a specimen from the tray while the
disc is rotating.
CAUTION
When the disc is rotating, make sure your hands are kept
completely clear of its periphery and out of the splash
bowl.
Rotation of the specimen mover head
• For manual preparation you can use the switch
on the side of the specimen mover head to
disable rotation of LaboForce-50.
A Switch
7.2.8 Starting and stopping the machine
Start the machine
WARNING
Do not use the machine with defective safety devices.
Contact Struers Service.
34 LaboPol-20
7 LaboForce-50
To Next Page